Residential · Tucson, AZ
When stucco starts cracking, delaminating, or trapping moisture, a patch is rarely enough, you need true stucco remediation that fixes the cause. Superior Stucco Tucson has served Tucson since 2015 with repair plans built around proper drainage, sound lath, and code-correct flashing details.
Stucco remediation starts with controlled demolition and clean prep, not just smearing on new finish. We map cracks, probe soft areas, and remove failed stucco back to solid substrate, then address the base assembly: galvanized weep screed at the bottom, Grade D building paper or equivalent water-resistive barrier in shingle fashion, and self-furring galvanized expanded metal lath fastened correctly. Where movement is the issue, we add control joints and backer rod and sealant at transitions to reduce recurring stress.
In our climate, intense sun, wind-blown rain, and big daily temperature swings can turn small defects into ongoing moisture problems. We detail kick-out flashing where rooflines meet walls, rework window and door terminations, and correct missing or buried weep screeds so the wall can drain and dry. After the base is right, we match your finish, including traditional three-coat stucco (scratch, brown, finish) or acrylic finish coats, with common textures like sand-float, lace, skip-trowel, and smooth trowel, and we color-match with integrally colored finish or elastomeric coating when appropriate.
Customers choose Superior Stucco Tucson because we treat remediation like a building-envelope repair, not a cosmetic touch-up. Licensed and insured, we provide a written scope that calls out materials, lath type, fastener patterns, flashing points, and cure times so you can compare apples to apples. Our crews use dust control and protection for landscaping and hardscape, and we keep the job moving with the right equipment, including mixing pumps, scaffolding, and moisture meters when needed to confirm drying conditions before re-coating.
At the end, we walk the project with you and verify the details that prevent repeat failures: weep screed exposure, sealant joints, proper clearances to grade and hard surfaces, and clean terminations at roof and trim. You get a clear record of what was removed and rebuilt, the texture and color selections used, and care instructions for curing and painting, including realistic timelines for cement plaster to dry before coating. If additional issues show up once we open the wall, we document them with photos and price options before proceeding, so there are no surprises.
Yes. We provide a free written estimate after an on-site look at the affected areas, access, and the finish you want.
Yes. Superior Stucco Tucson is licensed and insured for stucco work in Arizona.
We can often repair a section if surrounding stucco is solid and the texture can be blended. If the coating is failing across multiple elevations, a full recoat may look better and perform more consistently.
Yes. We take on commercial stucco repairs, façade refreshes, and maintenance scopes, including HOA common walls and multi-family properties.
Common finishes include smooth, sand, lace, skip trowel, and dash styles. We confirm the existing texture and provide a sample area when needed for approval.
Stucco remediation is the process of removing failed stucco and rebuilding the wall assembly so it manages water correctly, resists cracking, and bonds as a system. Unlike basic stucco repair, remediation addresses root causes such as missing weep screed, improper flashing, deteriorated lath, trapped moisture behind acrylic finishes, and movement at dissimilar materials. Superior Stucco Tucson focuses on correct prep, drainage plane details, and finish matching so your exterior looks right and performs for the long term.
Most recurring stucco problems start at transitions and terminations: roof-to-wall intersections without kick-out flashing, window perimeters sealed incorrectly, stucco buried below grade, or hardscape tight to walls with no clearance. Water gets behind the cladding, the paper and lath break down, and you see bubbling paint, dark staining, hollow-sounding areas, and spreading cracks. Remediation solves this by removing compromised material, restoring the water-resistive barrier and metal lath, and rebuilding coats to proper thickness with the right cure times.
We tailor the method to the existing system, including traditional cement plaster over paper and lath, or acrylic finish systems over a base coat. After demolition and prep, we install or repair flashing, reestablish drainage at the bottom edge with a galvanized weep screed, and detail joints with backer rod and exterior-grade sealant where appropriate. Then we apply scratch and brown coats (or approved base coats), float and texture to match, and finish with integrally colored stucco or a compatible coating once moisture levels and cure time support it.
If you are seeing recurring cracks, separation at trim, staining after storms, or patches that keep failing, schedule an on-site evaluation. We will identify likely entry points, explain what must be opened up versus what can be repaired in place, and provide a free written estimate with a clear scope for your stucco remediation project.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Tucson. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
